Forum Replies Created
- AuthorPosts
- Jason FrankenParticipant
Hi all.
I’m considering alternative drive motors for the RC John Deere 8360RT.How low geared (low rpm) does it need to be since that was an issue with an early attempt?
I can find flipped output 30 rpm n20 motors with threaded shafts or shorter shafts than used in the video, but the only one I see with the same size shaft as in the video is at 35 rpm.The motor at this url might fit without cutting as much away from the tractor body but is 87 rpm (https://www.ebay.com/itm/Micro-7-Type-N20-Full-Metal-Gear-Motor-DC-3V-87RPM-Slow-Speed-Threaded-Shaft-DIY-/113275372699)
Like in video but 35 rpm: (https://www.ebay.com/itm/1pcs-1024-N20-DC1-5V-6V-Flip-Speed-Reduction-Gear-Motor-with-Metal-Gearbox-Wheel-/162792853203?uskus=speed:35R/Min&vauurId=461831340782)
Threaded shaft: (https://www.ebay.com/itm/1024GA20-6-12V-Thread-Flip-N20-Reduction-Geared-Motor-M4-55mm-Shaft-30-200RPM-im-/183356645680?skus=Voltage:6V|Rated%20Speed:30RPM&varId=690668606656)
Shorter shaft: (https://www.ebay.cuom/itm/JGA1024-N20-Micro-DC-Gear-Motors-3V-6V-12V-15rpm-500rpm-For-DIY-Robot-Flip-/153273342268?skus=Voltage%20&%20Speed:6V%20-%2030RPM|Package%20Quantity:1PCS&varId=453150392849)Thanks,
Jason
- AuthorPosts