Forum Replies Created
- AuthorPosts
- November 19, 2017 at 9:47 pm in reply to: DIY Basic RC Controller – Arduino – NRF24 – my version of it (work in progress) #3572VCRParticipant
Thanks modelleicher
May 17, 2017 at 8:39 am in reply to: DIY Basic RC Controller – Arduino – NRF24 – my version of it (work in progress) #3563VCRParticipantHello
Only now that I have received the new drills and have not yet had the opportunity to re-test.
Regards, VCR
April 16, 2017 at 9:48 am in reply to: DIY Basic RC Controller – Arduino – NRF24 – my version of it (work in progress) #3558VCRParticipantThank you modelleicher. I’m going to buy a new drill, maybe with a slightly lower diameter. I will also redesign the plate to have more copper around the holes.
CNC is an excellent tool for manufacturing small parts. I’m using an MF70 with Chinese electronics.
April 15, 2017 at 8:55 pm in reply to: DIY Basic RC Controller – Arduino – NRF24 – my version of it (work in progress) #3556VCRParticipantIt did not go very well. I do not think it will be possible to weld.
https://drive.google.com/open?id=0BzmqDlmVPwLCZ1RfRGsxRUtNX2M
April 3, 2017 at 9:12 pm in reply to: DIY Basic RC Controller – Arduino – NRF24 – my version of it (work in progress) #3555VCRParticipantAgain, thanks for sharing all this work.
For a while I did slot-car races, though the track closed and I got stuck with some 1/32 and 1/24 material. I thought of converting some of my slots to RC but I did not find anything adapted to what I want, either it does not exist or it’s too expensive. As I do not want to do races with them the TB6612FNG serves perfectly and on the other hand with the arduino I can control the lights, blinkers, windscreen wiper … The objective is to create an accessible platform that allows to convert a slot or a plastic kit (car, truck, tractor, machine …) in RC in an affordable way. I opted for the 1:24 scale to have room to install FPV and because there is a lot available. As I’m not very good at electronics and programming I investigated and ended up coming here 🙂
As soon as I have a little time I will carefully study all the information you have made available. For now I will concentrate on the receiver.Regards, VCR
March 31, 2017 at 7:36 pm in reply to: DIY Basic RC Controller – Arduino – NRF24 – my version of it (work in progress) #3549VCRParticipantI already started the drawing to make the board but I’m having a hard time seeing the connections to the Arduino. You can see the drawing at this address:
https://drive.google.com/open?id=0BzmqDlmVPwLCRXlONHFJczA0NGc
Can you help me finish the drawing?
I would like to try to optimize the receiver board to function more as a shield for the Arduino.Thanks again for sharing the project
Vasco ReisMarch 29, 2017 at 9:27 pm in reply to: DIY Basic RC Controller – Arduino – NRF24 – my version of it (work in progress) #3547VCRParticipantI am not an expert in the subject but I will try to make a clone. Do you have any circuit schematics that you can share?
March 29, 2017 at 12:46 pm in reply to: DIY Basic RC Controller – Arduino – NRF24 – my version of it (work in progress) #3546VCRParticipantThanks for sharing this project. I’ll see it very carefully. I’m trying to build an 1/24 scale R/C and this controller seems to be prefect
VCRParticipantOk, thanks
VCRParticipantI lost the kickstarter campaign … is it still possible to buy a kit for the controller?
Thanks VCR
- AuthorPosts