Every time I build an RC vehicle I end up putting together the Arduino knob example sketch to test a servo or two. This works fine except it takes quite a while to set up particularly if you need to control more than one so I decided to make a […]
Servo
I’ve added a new video of the fifth wheel on my Scania R620 model. I used a tiny hobby king servo and a small piece of plastic to mount it. It is actually a rather simple build compared to the tractors as the model was designed to be radio controlled […]
Adding control to a 1:32 scale SIKU Scania R620 model
Here is a great example of how to convert a standard 180 degree servo into a continuous rotation servo. You might want to do this to make screw drives for a radio controlled excavator model or to drive the wheels of an RC tractor model. A servo consists of a […]